固定機注塑機,，也稱為立式注塑機，具有以下特點：

1. 注射裝置和鎖模裝置處于同一垂直中心線上,，模具沿上下方向開閉,，占地面積小，約為臥式注塑機的一半,，但生產效率約為臥式機的兩倍,。

2. 簡單實現嵌件成型，由于模具表面朝上,，嵌件放入定位簡單,，可實現全自動嵌件成型。

3. 模具重量由水平模板支承,，避免了由于模具重力引起的前倒現象，有利于保持機械和模具的精度,。

4. 通過簡潔的機械手可取出各個塑件型腔,，有利于精密成型。

5. 一般鎖模裝置四周為開開放式,，易于配置各類自動裝置,，適應于簡單,、精致產品的自動成型。

6. 拉帶輸輸送裝置簡單實現串過模具中間安裝,，便于實現成型自動生產,。

7. 容易保證模具內樹脂流動性及模具溫度分布的一致性。

8. 配備有旋轉臺面,、移動臺面及傾斜臺面等形式,，實現嵌件成型、模內組合成型,。

9. 小批量試生產時,，模具構造簡單成本低，且便于卸裝,。

10. 經受了多次地震的考驗,，立式機由于重心低，相對臥式機抗震性更好,。

這些特點使得固定機注塑機在生產效率,、操作簡便性、產品質量和適應性方面具有優勢,，適用于各種類型的塑料制品生產,。

Fixed machine injection molding machine, also known as vertical injection molding machine, has the following characteristics:

1. the injection device and the clamping device are on the same vertical centerline, the mold opens and closes along the up and down direction, the footprint is small, about half of the horizontal injection molding machine, but the productivity is about twice of the horizontal machine.

2. Simple realization of insert molding, because the mold surface is facing upwards, inserts into the positioning is simple, and fully automatic insert molding can be realized.

3. The weight of the mold is supported by the horizontal template, which avoids the phenomenon of forward reversal caused by the gravity of the mold, and helps to maintain the accuracy of the machine and the mold.

4. Each cavity can be taken out by simple manipulator, which is good for precision molding.

5. the general mold clamping device is open around, easy to configure all kinds of automatic devices, adapted to simple, delicate products automatic molding.

6. The belt conveyor is easy to be installed in the middle of the mold, which is convenient for automatic molding production.

7. It is easy to ensure the consistency of resin fluidity and mold temperature distribution in the mold.

8. Equipped with rotating table, moving table and tilting table to realize insert molding and in-mold combination molding.

9. Simple and low-cost mold construction for small-lot trial production, and easy to unload.

10. withstood the test of many earthquakes, vertical machine due to the low center of gravity, relative to the horizontal machine seismic better.

These features make the fixed machine injection molding machine in the production efficiency, ease of operation, product quality and adaptability has the advantage, suitable for all types of plastic products production.