立式轉盤注塑機是一種高效的塑料成型設備,，具有以下特點：

1. 結構特點：

   - 注射裝置和鎖模裝置處于同一垂直中心線上,，模具沿上下方向開閉,，占地面積約為臥式機的一半，生產效率約為臥式機的兩倍,。

2. 模具更換方便：

   - 模具的重量由水平模板支撐,，上下開啟和關閉，不會發生類似臥式機器的模具重力引起的前倒,，使得模板無法關閉的現象,。有利于持久性保持機械和模具的精度。

3. 易于實現自動化：

   - 通過簡單的機械手可取出各個塑件型腔,，有利于精密成型,。一般鎖模裝置周圍為開放式，容易配置各類自動化裝置,，適應于復雜,、精巧產品的自動成型。

4. 嵌件成型簡單：

   - 模具表面朝上,，嵌件放入定位容易,。采用下模板固定、上模板可動的機種,，拉帶輸送裝置與機械手相組合的話,，可容易實現全自動嵌件成型。

5. 適應性強：

   - 拉帶輸送設備簡單地安裝在模具中間,，便于成型和自動生產,。容易保證模具中樹脂的流動性和模具溫度分布的一致性。

6. 成本效益：

   - 小批量試生產時,，模具構造簡單成本低,，且便于卸裝。經受了多次地震的考驗,，立式機由于重心低，相對臥式機抗震性更好,。

此外,，立式轉盤注塑機還配備了旋轉臺面、移動臺面及傾斜臺面等形式,，容易實現嵌件成型,、模內組合成型，適合大射膠量生產，并通過多段壓力輸出實現精密準確的注射成型,。

綜上所述,，立式轉盤注塑機以其高效率、高精度和靈活性,，在塑料成型領域占據重要地位,，特別適合復雜、精密產品的自動化生產,。

Vertical rotary table injection molding machine is a kind of efficient plastic molding equipment with the following features:

1. Structural features:

   - The injection device and clamping device are on the same vertical centerline, the molds are opened and closed along the up and down direction, the floor space is about half of the horizontal machine, and the production efficiency is about twice of the horizontal machine.

2. Easy mold replacement:

   - The weight of the mold is supported by the horizontal template, which opens and closes in the up and down direction, and the phenomenon that the template can not be closed due to the forward fall caused by the gravity of the mold similar to that of the horizontal machine will not occur. This helps to maintain the accuracy of the machine and mold in a durable manner.

3. Easy to realize automation:

   - Each plastic part cavity can be taken out by a simple manipulator, which is conducive to precision molding. General clamping device around the open, easy to configure all kinds of automation devices, adapted to complex, delicate products, automatic molding.

4. Simple insert molding:

   - The surface of the mold is facing upward, so it is easy to put the insert into the positioning. If the lower mold plate is fixed and the upper mold plate is movable, and if the belt conveyor is combined with the manipulator, fully automatic insert molding can be easily realized.

5. Strong adaptability:

   - The pull belt conveyor is simply installed in the middle of the mold for easy molding and automatic production. It is easy to ensure the flow of resin in the mold and the consistency of temperature distribution in the mold.

6. Cost-effective:

   - For small-lot trial production, the mold construction is simple and low cost, and easy to unload. Having been tested by many earthquakes, the vertical machine is more resistant to earthquakes compared to the horizontal machine due to its low center of gravity.

In addition, the vertical rotary table injection molding machine is equipped with rotary table, moving table and tilting table, which is easy to realize insert molding, in-mold combination molding, suitable for large injection volume production, and through the multi-stage pressure output to achieve precise and accurate injection molding.

To sum up, vertical rotary table injection molding machine occupies an important position in the field of plastic molding with its high efficiency, high precision and flexibility, which is especially suitable for the automated production of complex and precise products.